Woodworking Plans

🔥+ Woodworking Plans 05 Jun 2020 Wider or thinner planks would definitely be different and fun. Report this ad. To hang the wood, we started with an 8 foot piece.

Woodworking Plans SAMPLE PACK*** Reclaimed Interior Barn Wood Wall Paneling, Real Rustic Shiplap ceiling, Kitchen, Bathroom DIY Planks, Sample Pack. ABWframes.

Quaint Cottage Plans

The other day I was browsing projects on Ana White''s site and there is a downloadable PDF. Ana White and Whitney from Shanty-2-Chic partnered on creating the plans. The project is fairly simple and will take about a day to assemble + finishing time.

Plans

Plans can be found on Ana''s website.

Modifications: The only modifications I made to Ana''s and 1 2×10 for the top of the table. I used a 2×8 for the breadboard ends as well.

Tools

Power Drill
12″ Miter Saw
Kreg Jig
Orbital Sander

Finish

#00 Steel Wool and White Vinegar – Put a handful of steel wool in a jar and add white vinegar. Let the vinegar dilute the steel wool for at least a couple days. The mixture will get darker the longer you let it sit. Once diluted, simply paint the mixture on your piece. Oxidation will occur and the mixture reacts with the tannins in the wood to give it variations in color. It changed the Fir wood to dark blues, greys, browns, and black. Do not use white Pine because it will not darken much at all.

* You can always dilute your mixture if it is too strong. Simply pour a little of the strong mixture in a new cup and add white vinegar.

The Build

First, I built the two ends out of 4×4''t have an extra set up hands to help me, so I used Jack Clamps to help hold everything up while I tied the boards in with 6″ torq (also known as star) screws. Check out my resources page for more info on the JackClamp.

* I do not have a photo of the next step, but connect the two 2×4 horizontal boards on each side of the top horizontal 4×4 beam.

Next, make your breadboard top out of four 2×8''s plans call for all 2×10''s because they are easier to work with. I don''s to the top and 2 or 2.5″ screws to anchor the top to the 2×4 horizontal boards.

Once assembled, it will look like for 1 last update 2020/06/05 the photo below.Once assembled, it will look like the photo below.

Next, grab a brush and coat the entire project with the steel wool and vinegar solution. After 20 minutes the table darkened up quite a bit. It continued to darken over the next 1 to 2 hours. Once it has darkened, let the table dry completely.

If you missed any spots, simply grab your brush and go over the spots you missed. Below is a photo of the table after about 45 minutes.
*I like to flip the table on it''t have the time.

Woodworking Planshow to Woodworking Plans for Below is a photo of the table after 1 hour and 15 minutes. The table darkened up quite a bit. You''ll be able to even out for 1 last update 2020/06/05 some of the spots that absorbed the first coat.Below is a photo of the table after 1 hour and 15 minutes. The table darkened up quite a bit. You''ll be able to even out some of the spots that absorbed the first coat.

After the second coat, I let the table dry completely. Then, I took a 400 grit sanding blog and quickly the 1 last update 2020/06/05 sanded the top surface and legs. This smooths out any bumps or dust that may have dried in the finish. After sanding, take a damp rag to clean off the sawdust. Lastly, use a clean rag and wipe a very thin 3rd coat on all of the parts you sanded. This will give the table a final shine. Let the table dry and air out for awhile.After the second coat, I let the table dry completely. Then, I took a 400 grit sanding blog and quickly sanded the top surface and legs. This smooths out any bumps or dust that may have dried in the finish. After sanding, take a damp rag to clean off the sawdust. Lastly, use a clean rag and wipe a very thin 3rd coat on all of the parts you sanded. This will give the table a final shine. Let the table dry and air out for awhile.

Last but not least, carry your table in the house and enjoy!
Not bad for about $120-$150 in materials!


Please let me know if you have any questions during the build. Make sure to check out Ana''cat''cat''postform''-1'>Select Category