Woodworking Plans

🔥+ Woodworking Plans 27 May 2020 Danze & Davis Architects Too Close for Comfort This plan achieves the goal of two master bedrooms—one upstairs and one downstairs—but the first floor ...

Woodworking Plans We have recently acquired some 70s teak furniture (G-plan, Nathan) and ... stocks and restores a large range of second-hand Ercol and Nathan furniture. ... Cabinet Making, from the Guild of Master Craftsmen (01273 478449, ...

Small Computer Desk Solid Wood Plans

Menu
Free Loft Bed Plans
Jack Sander | Bed Frame, Bedroom, Bunk Bed, Furniture Woodworking Planshow to Woodworking Plans for |

This step by step by step diy woodworking project is about free loft bed plans. If you want to learn more about building a loft bed, we recommend you to pay attention to the instructions described in the article. There are many plans and designs to choose from, so make sure you take a look over the rest of the projects featured on our website. Use quality materials and take your time before starting the assembly of the bed.

Before starting the actual construction project, we recommend you to plan everything, as to save money and to keep the costs under control. Adjust the size and the design of the loft bed to suit your needs. In addition, we recommend you to invest in high-quality materials, such as pine, redwood or cedar, as they have a nice finish and are highly durable, especially in a humid environment.

Woodworking Planshow to Woodworking Plans for If you don’t have a rich expertise in woodworking field, you should ask a friend to give you a hand with the project. There are many things that you could go wrong, so make sure you plan everything and invest in quality materials. Select the lumber with attention, making sure the components are perfectly straight and in a very good condition. Use a carpentry square to check if the corners are right-angled.

 

Made from this plan

Woodworking Planshow to Woodworking Plans for  

Free Loft Bed Plans

Building the 1 last update 2020/05/27 a loft bedBuilding a loft bed

 

Woodworking Planshow to Woodworking Plans for Materials

  • A – 4 pieces of 4×4 lumber – 69″ long, 1 piece of 2×4 lumber – 21 3/4″ long LEGS
  • B – 4 pieces of 2×6 lumber – 43″ long, 3 pieces – 76″ long FRAME
  • C – 3 pieces of 2×4 lumber – 76″ long, 11 pieces of 1×6 lumber – 40″ long SUPPORTS
  • D – 3 pieces of 2×4 lumber – 72″ long, 3 pieces – 43″ long, 3 pieces – 51″ long GUARD RAILS
  • E – 2 pieces of 2×4 lumber – 58″ long, 5 pieces of 1×3 lumber – 16 1/2″ long  for 1 last update 2020/05/27 STAIRSTAIR

 

Tools

 

Tips

  • Apply several coats of wood stain to the wooden components
  • Fill the holes with wood filler and smooth the surface

 

Time

  • One Day

 

Related

 

 

Building a loft bed

Building the bed frame

for 1 last update 2020/05/27   

The first step of the woodworking project is to build the frame of the bed frame. As you can easily notice in the plans, we recommend you to assemble the frame out of 2×6 lumber. Drill pocket holes at both ends of the long components and insert 2 1/2″ screws into the perpendicular components. Make sure the corners are right-angled and add waterproof glue to the joints, in order to create a rigid structure.

Woodworking Planshow to Woodworking Plans for for 1 last update 2020/05/27   

Building the frame of the bed frame

 

Continue the woodworking projects by attaching the 4×4 legs to the frame of the loft bed. Drill pilot holes through the frames and insert screws into the wooden posts. Plumb the posts with a spirit level and check if the frames are horizontal. Make sure the corners are square before inserting the screws into place.

 

Fitting the 1 last update 2020/05/27 the cleatsFitting the cleats

 

Fit the 2×4 cleats to the top bed frame, following the instructions described in the diagram. Secure the cleats to the frame by using 2 1/2″ galvanized screws. Work with attention and leave no gaps between the components, if you want to get the job done in a professional manner.

 

Fitting the support slats

 

Continue the woodworking project by fitting the 1×6 support slats to the cleats. Place the slats equally-spaced and secure them to the cleats with galvanized screws. Make sure the slats describe a level and perfectly horizontal surface, otherwise you won’t be able to attach the mattress properly.

 

Fitting the guard for 1 last update 27 May 2020 railsFitting the guard rails

 

Secure for 1 last update 2020/05/27 the 2×4 guard rails into place, as shown in the diagram. Drill pocket holes at both ends of the slats and secure them into place with 2 1/2″ screws. Make sure you place the rails equally-spaced, in order to add character to the project.Secure the 2×4 guard rails into place, as shown in the diagram. Drill pocket holes at both ends of the slats and secure them into place with 2 1/2″ screws. Make sure you place the rails equally-spaced, in order to add character to the project.

 

Building the stairs supports

 

Building the stairs for the loft bed is a straight-forward project, but you need to pay attention to the instructions described in the article. Mark the cut lines on the 2×4 slats and get the job done with a circular saw. Smooth the cut edges with sandpaper and repeat the process for the other support.

 

Building the stairs

 

Fit the 1×3 steps between the supports and secure them into place with galvanized screws. Drill pocket holes at both ends of the steps and secure them to the supports with 1 1/4″ screws. Add waterproof glue to the joints in order to create rigid joints. Fit the stair to the frame of the loft bed and secure it into place with galvanized screws. Add waterproof glue to the joints in order to create a rigid structure.

 

Free loft bed plans

 

Last but not least, we recommend you to take care of the finishing touches. Fill the holes with wood filler and let it to dry out for several hours. Afterwards, smooth the wooden surface with fine-grit sandpaper and vacuum the residues.

Woodworking Planshow to Woodworking Plans for Smart Tip: Apply several coats of stain or paint to the wooden components, if you want to protect them from decay and to enhance the look of the bed.

Woodworking Planshow to Woodworking Plans for  

 

Woodworking Planshow to Woodworking Plans for Thank you for reading our project about free loft bed plans and we recommend you to check out the rest of the projects. Don’t forget to share our projects with your friends and LIKE us, by using the social media widgets. SUBSCRIBE if you want to be the first that gets our latest articles.




Woodworking Planshow to Woodworking Plans for Related Posts

One Response

  1. Zach

    Woodworking Planshow to Woodworking Plans for Looking to build this as a queen size bed. Would love some advice/ tips on adjusting the plans. I’m a beginner wood worker

Add Comment