Woodworking Plans

🔥+ Woodworking Plans 03 Jun 2020 Metal home kits from Worldwide Steel Buildings allow you to create the steel frame house of your dreams ...

Woodworking Plans All these 40 DIY hammock stand ideas can be easily done at home if you know ... Free-Standing Portable Hammock Stand ... Made from assembling spray-painted PVC pipes, this lightweight and portable DIY hammock is a ...

Build Redwood Deck Need Waterproofing Basement

Simple workbench plans – Plans include a free PDF download, shopping list, cutting list, drawings, and step-by-step instructions.

Simple Workbench Plans – Overview

Simple Workbench Plans – Material List

Shopping List

Shopping List

  • 2 – 4×4 – 8′
  • 5 – 2×4 – 8′
  • 2 – 3/4″ plywood – 2’x8′ sheet
  • 4 – locking casters
  • 2″ deck screws
  • 3″ deck screws

Cutting List

Cutting List

  • A – 4 – 4×4 – 2′ 7 1/4″
  • B – 2 – 2×4 – 5′
  • C – 2 – 2×4 – 4′ 5″
  • D – 8 – 2×4 – 1′ 9″
  • E – 1 – 3/4″ plywood – 2’x5′
  • F – 1 – 3/4″ plywood – 2’x3′ 10″

Cut four 4×4’s to the 1 last update 2020/06/03 2′ 7 1/4″ long (A). Notch the 4×4’s (A) as shown on illustration above.Cut four 4×4’s to 2′ 7 1/4″ long (A). Notch the 4×4’s (A) as shown on illustration above.

Cut two 2×4’s to 5′ long (B). Cut two 2×4’s to 4′ 5″ long (C). Assemble as shown on illustration above, pre-drill holes and screw 3″ deck screws through (B), (C), and into (A).

Cut eight 2×4’s to 1′ 9″ long (D). Pre-drill holes and screw 3″ deck screws through (B), (C), and into (D).

Cut a 3/4″ plywood to 2’x5′ (E). Cut a 3/4″ plywood to 2’x3′ 10″ (F). Pre-drill holes and attach the plywood to the workbench using 2″ deck screws.

Attach locking casters to workbench legs (A).

Like these simple workbench plans? Let me know, leave me a comment below. Share this link with your friends and your social media, thanks.
Construct101 offers free online version plans. These free plans also have a free print friendly PDF downloadable version free of ads. Click here to download.

Related Articles

9 comments

  1. Love all of these

  2. Woodworking Planshow to Woodworking Plans for Can you tell me what the load capacity is for the simple workbench plans? I am building this to hold a commercial printer that weighs 336 lbs. It will be positioned evenly.

    Woodworking Planshow to Woodworking Plans for I do plan to use carriage bolts to bolt B and C to A.

    Thanks

  3. How do you cut the notch that is 3 1/2” from the end of the 2 x4?

  4. what size locking casters do you recommend for the simple workbench?

  5. If the width of the plywood top is 2′ and if the width of B is 2″, shouldn’t the length of D be 1’8″ instead of 1’9″? I mean, we have (width of B + length of D + width of B) = width of plywood.
    What am I missing?

    • The cross pieces are 1 foot 9 inches, or 21 inches. The combined measurement of the two 2×4’s on the outside is 3 inches which give you a total width of 24 inches.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Woodworking Planshow to Woodworking Plans for

Copyright 2020 www.Construct101.com