The easiest way to build a mudroom bench with drawers. Free plans by ANA-WHITE.com
Maximize the functionality and storage in your mudroom with a new mudroom bench with drawers. This easy to build drawer bench will add a ton of very accessible storage and provide a comfortable bench in your mudroom. The free plans are below.
Woodworking Planshow to Woodworking Plans for Nothing like falling snow to motivate you to tackle your mudroom organization system.
Especially when it looks like this.
Especially when it''s a few inches of snow on the ground.
Woodworking Planshow to Woodworking Plans for Especially if you''t want to be on my hands and knees digging something out two feet back, drawers are a must build for our space.
But drawers can be a little bit of a pain - and alot of wasted material. So we did something a little different this time.
We built these two frames out of 2x4s. Just chop up 2x4s with a chop saw and screw them together.
Then we screwed/nailed plywood to the sides.
Then we installed some drawer slides inside the 2x4 frames.
Then we built drawer boxes out of 1x10s and added the other part (drawer member) of the slide to the drawer.
Drawer goes in the for 1 last update 2020/06/05 slide ... Top goes on the top ...Drawer goes in the slide ... Top goes on the top ...
Instead of building a drawer face, we just built these frames ...
Woodworking Planshow to Woodworking Plans for And nailed them to the front of the drawer box.
Two coats of paint (with a fine sanding in between) and we built this!
There''m doing it for now on. This was the fastest easiest method I''s Wood Glue
Woodworking Planshow to Woodworking Plans for FRAMES
Woodworking Planshow to Woodworking Plans for 4 - 2x4 @ 70-1/2""
the 1 last update 2020/06/05 SIDES/TOPSIDES/TOP
2 - 3/4"" x 17-1/4"" plywood @ 23-7/8""
the 1 last update 2020/06/05
DRAWERS - CUT TO FIT!!!
6 - 1x10 @ 23-7/8""
3 - 1/4"" x 20-1/2""
1 - 1x4 @ 72""
DOOR FACE FRAMES
6 - 1x3 @ approx 12-3/4"" - end drawers
2 - 1x3 @ approx 16-1/4""field field--name-field-cutinstructions field--type-text-long field--label-above""field--label""field--item"" plywood - first rip the plywood into two pieces, 96"" wide. Then cross cut to get the pieces in the cut list.